https://moonmachineryinc.com/product/woodworking-machinery/sawmill/h-resaws/multihead-horizontal-resaw-machine/
Excellent way to increase production. Sawyer mills a cant 5.25″ high for 1″ lumber up to 10″ wide. It is feed through resaw and produces 5 pieces of 1″ thick lumber or 10.25″ high for five pieces of 2″ lumber
https://www.rotochopper.com/product/sb-24e/
Includes at no charge a 24″ conveyor belt system that feeds the slabwood into the roto-chopper grinder. The concrete enclosure of 4 walls and ceiling around the grinder was to reduce the noise levels to the accepted level set by the Ministry of the Environment. This is similar construction to the noise barriers along four lane highways and is included at no charge.
Hardwood Kilns
Our modern, advanced Wood-Mizer Kiln is made by Nyle and we have a second unit directly from Nyle. Each kiln can dry approximately 2,000 board feet. We split our original onsite kiln into two sections. One side dries 1″ hardwoods which takes approximately 2 weeks. The second side dries 2″ hardwoods which take approximately 4 weeks. We split into two sections as when we used to combine 1″ and 2″ the 1″ would dry first and we would remove. We then could not add more green 1″ lumber as the moisture would travel from the new greener lumber to the partially dried 2″ lumber.
Softwood Kiln
Regular $68,964 on sale for $34,482 plus tax.
We share our softwood kiln with Doug Cleary at Clearydale Farms. We harness excess heat from the generators producing electricity from the gas of an anaerobic digestion system. This is an incredible green approach to kiln drying softwood lumber. This kiln can dry approximately 5,400 to 7,200 bf.
Once the lumber is kiln dried, either from the hardwood or softwood kilns it is moved into our work shop to be dressed into lumber.
The Clearydale Kiln was Our Work Horse
We have $69,964 tied invested in our Clearydale Kiln. The 40′ container alone was $22,950 alone. We will sell for 50% off or $34,482 plus tax. The container was a brand new military container 9′ high, front entry.
Just need to come and pick it up. Turn Key
Any Questions please call me at 613-884-9457.
Work Shop Liquidation Package Pricing
Work Shop Equipment
1. Saw Stop Table Saw (Lee Valley) – Sale $4,726 We Paid $7,053 so 33% Off
2. Laguana Drum Sander PRO75 (Cardon) – Sale $15,075 We Paid $22,500 so 33% off
3. Wood Mizer Planer/Moulder MP360 (Woodmizer Canada) – Sale $22,000 We Paid $33,000 so 33% off
4. Oneida Air System – Motor, Filters, Ducting – Sale $13,973 We Paid Retail $20,856 so 33% off
5. Atlas Copco Air Compressor- Sale $4,718 We Paid $7,042 so 33% off
6. Shop Fox Power Feeder –Sale $1,223 We Paid $1,825 so 33% off
Buy the Entire Package- Sale $55,366 We Paid $92,276 40% off
From the jointer it is moved into our Wood-Mizer MP360 Planer/Moulder. With many different profiles available we can produce.
- scalloped siding
- Imitation siding
- tongue & groove with or without a v joint
- shiplap with or without a 1/8 reveal
- wainscoting
- decking
- dimensional lumber
- specialty pieces for cabinet makers
- catalogue has a wide assortment of profiles/knives
If you are planning on staining your dried and dressed lumber it would be wise to put if through our 37″ wide belt sander. It will take most is not all of the imperfections left after dressing (planning) that the stain will accentuate. We are constantly asked to sand customers pieces as well before staining. We have standard grits from 80 to 150.
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 1HP motor and has a variable speed conveyor of 12-60 FPM.