Hardwood Lumber Clearance Starts Tuesday September 3rd.
We are heavily overstocked and winter is coming.
White Ash & Soft Maple are 67% off !
All other rough sawn hardwoods are 50% off
Over 60 pieces of Live Edge also reduced by 50%
All our dried and dressed hardwoods also reduced minimum 50% to 67% off (lumber portion only).
Large Selection of Dried & Dressed Cedar in Stock 33% off
Rough Sawn Pine & Spruce Full Lift Clearance 50% off April prices – Over 40 Lifts ready to go!
We will load the lift directly onto your flatbed trailer no hand bombing!
4 inch & 6 inch is $0.75/bf was $1.50/bf in April, 8 inch & 10 inch is $0.825/bf was $1.65/bf in April
Deposit required for drying ‘stickers’- but once returned by November 30th are fully refunded.
1*4*8 is approx. 180 pieces only $360, 1*6*8 is 108 pieces only $324, 1*8*8 is 90 pieces only $396, 1*10*8 is 72 pieces only $396. 2*4*8 is 90 pieces only $360 , 2*6*8 is 63 pieces only $378, 2*8*8 is 45 pieces only $396.
Many sizes are now sold out!!
Malwood Sawmills serve Eastern Ontario with quality products and informed customer service!
Whether you’re an experienced woodworker, a beginner, a contractor, or a do-it yourself renovator, we have everything you need to get the job done at Malwood Sawmils.
- Sawmill Services
- Planing, Moulding & Sanding
- Exterior Wooden Siding such as Board & Batten, Scalloped & Imitation Log
- Finished Lumber such as Square, Ship Lap plus Tongue & Groove etc
- Softwood and Hardwood Flooring
Expertise
All senior sawmill staff are within a 30 minute drive to our location and have extensive experience working with wood and wood products.
Flexibility
Need drying services or special cuts for wood projects? We have the state-of-the-art equipment to handle that, too.
Value
At Malwood Sawmills, one of our core values is to offer quality products at affordable prices.
We offer what you need, when you need it, at prices that won’t break the bank, whether your job is big or small.
STEP 1
Log Preparation and
Sawing
Incoming logs are scaled then marked for their diameter, sorted by length and stored. The logs are then cut into rough sawn lumber using our bandsaw sawmill based on customer orders and stock requirements.
STEP 2
Drying and
Grading
The freshly cut lumber maybe left rough sawn or kiln dried using one of our 3 kilns or air dried for cedar. A moisture levels of 15% is for exterior grade and 8% for interior grade. Our lumber with loose knots is not sold.
STEP 3
Finishing and
Packaging
Lumber undergoes final processing, such planning/dressing and or sanding before being put ready to sell to a customer or into stock. Rough sawn is stickered and placed in out storage barn or outside if pine to prevent molding.
